How to Replace the Battery in a 2017 GMC Savana Key Fob
Keyless entry remote allow easy access to your car. When the remote key fob battery is dead you lose your keyless entry fob's ability to use remote functions. In this post, we are going to tell you how to open your remote key fob and change a discharged battery yourself. If you decide to do it at home near Savana, use this guide, but don't forget to check everything you need before you start.
What size battery does 2017 GMC Savana keyless entry remote required
Prior to open keyless entry remote make sure that you have all recommended tools and materials: CR2032 battery and flat head screwdriver.- 1xCR2032 battery
- flat head screwdriver
Simple steps to change the battery in your car's remote key fob
A coin battery installed in the your keyless entry remote. Open key before you try to pry apart the key fob.
Delicately try to disassemble your fob with hands or flat head screwdriver. Replace 1xCR2032 battery with flat head screwdriver.
Now it's time to install new battery in keyless entry fob's body. Every battery has a negative and positive side and if you put the wrong connector down, the current cannot go into your circuit board and make it work. Check position on battery, by "+" mark.
Before assembling keyless entry fob's case, verify that everything is functioning by testing buttons on circuit board.
The last thing to do is put your cover back on fob. Gently try to put the pieces in place by hands from top to bottom. If your remote key fob body firmly closed, we done. If not, repeat the last step.
Key Fob Battery Replacement 2017 GMC Savana Video
GMC key fob battery replacement.
Still not working? Buy new one