2017 Nissan NV Key Fob Battery Replacement Guide
If your car remote key fob isn't working properly, the cell battery most likely must to be changed. Yes, it is possible to replace the battery in your remote key fob with our step by step instruction. All you need is described in this article.
What is the battery keyless entry remote use
Replacing battery in key fob require flat head screwdriver and 1xCR1620 battery. Prepare these materials and tools before opening and make sure to match the size of your keyless entry fob's batteries.- 1xCR1620 battery
- flat head screwdriver
Simple steps to replace the battery in your NV's key fob
A small coin cell battery installed inside the your keyless entry remote. Move the key out of the way if it is in the keyless entry remote.
Accurately try to disassemble your keyless entry remote with pry tools. Remove 1 CR1620 battery with flat head screwdriver.
Change old battery with new one CR1620. Battery must be installed with the same position as was a previous. Your key fob will not work if you by mistake put battery wrong way.
Before assembling fob’s case, check that all functions works by testing buttons on circuit board.
At this point squeeze keyless entry fob's back cover together. Line your case pieces together and assemble it together by hands from top to bottom. If your keyless entry remote case firmly closed, we done. If not, repeat the last step.
How to replace the battery video guide
Key Fob Battery Replacement on my Nissan NV200
Still not working? Buy new one