How to Replace the Battery in a 2017 Nissan Rogue Key Fob
If your auto key fob isn't working perfectly, the cell battery likely must to be replaced. Yes, it is possible to change the battery in your key fob, and it’s easier than you think. All you need is described in this post.
What kind of battery remote key fob requireBefore going to open key fob check all that you need: 1 CR2032 battery and flat head screwdriver.
- 1xCR2032 battery
- flat head screwdriver
Simple steps to change the battery in your car's remote key fob
Inside of your keyless entry remote installed small button cell battery. Remove any internal key first, and then try to pry apart the remote key fob.
Accurately try to open your key fob with pry tools. Change 1 CR2032 battery with flat head screwdriver.
Change old battery with fresh one CR2032. Every battery has a negative and positive side and if you put the wrong connector down, the current cannot go into your circuit board and make it work. Check position on battery, by "+" mark.
When the new battery installed, check keyless entry remote functionality by pressing buttons. If all functions works, assemble your keyless entry fob's shell in reverse order.
The last thing to do is put your cover back on fob. Delicately try to assemble the two halves together by hands from top to bottom. Inspect your key fob case for gaps. If it is not tightly closed try to repeat last step.
Key Fob Battery Replacement 2017 Nissan Rogue Video
2017 Nissan Rogue - Intelligent Key Remote Battery Replacement (if so equipped)