2017 Subaru BRZ Key Fob Battery Replacement Instructions

If your Subaru keyless entry remote is not open doors correct, the battery most likely must to be changed. In this article, you will benefit from knowing how to open your remote key fob and replace a dead battery DIY. If you decide to do it at home near BRZ, follow our guide, but first make sure you have tools and materials required.
What type battery keyless entry remote use
Prior to open key fob check all that you need: flat head screwdriver and CR2032 battery.- 1xCR2032 battery
- flat head screwdriver
Simple steps to change the battery in your BRZ's key fob
Inside of your keyless entry remote installed coin cell battery. Move the key out of the way if it is in the key fob.
Gently try to pry apart your remote key fob with hands or flat head screwdriver. Replace CR2032 battery with flat head screwdriver.
Now it's time to install new battery in keyless entry fob's body. Be sure to connect the battery the right way around in a circuit. Your key fob will not work if you connect battery wrong way.
When the new battery installed, verify key fob by pressing buttons. If all functions works, assemble your fob’s body in reverse order.
The last thing to do is put your cover back on fob. Delicately try to put the pieces together by hands from top to bottom. If your remote key fob case firmly closed, we done. If not, repeat the last step.
Video of key opening
BRZ Dead Key Fob / How to Replace Key Fob Battery
Still not working? Buy new one