2017 Subaru Impreza Key Fob Battery Replacement Instructions
If your car key fob is no longer unlock doors well, the cell battery most likely must to be changed. It's not difficult to replace the battery in your remote key fob by yourself. All you need is outlined in this post.
What is the battery key fob use
Don't forget before open keyless entry remote make sure that you have all required tools and materials: one CR1620 battery and flat head screwdriver.- 1xCR1620 battery
- flat head screwdriver
Step by step guide
A coin cell battery installed inside the your keyless entry remote. Remove any internal key first, and then try to pry apart the key fob.
Carefully try to disassemble your key with flat head screwdriver. Change 1 CR1620 battery with flat head screwdriver.
Get new battery and install it in keyless entry fob's body. Battery must be installed with the same position as was an old. Your key fob will not work if you by mistake put battery wrong way.
Before assembling keyless entry fob's case, check that everything working properly by pressing buttons on circuit board.
The last thing to do is put your cover back on fob. Delicately try to put the two halves together by hands from top to bottom. If your keyless entry remote shell tightly closed, we done. If not, repeat the last step.
Key Fob Battery Replacement 2017 Subaru Impreza Video
How To Replace Subaru Key Fob Battery DIY 2014 2015 2016 2017 2018 2019 2020
Still not working? Buy new one