2018 Chevrolet Colorado Key Fob Battery Replacement Guide
If your auto key is no longer working perfectly, the cell battery most likely must to be replaced. Below, we explained how to open your car key fob and replace a weak or dead battery yourself. If you decide to do it at home near Colorado, follow our instruction, but don't forget to check tools and materials required before you start.
What kind of battery keyless entry remote useBefore you start to disassembly keyless entry remote check all that you need: flat head screwdriver and one CR2032 battery.
- flat head screwdriver
- 1xCR2032 battery
Step by step guide
Inside of your remote key fob installed coin battery. Open key before you try to pry apart the keyless entry remote.
Delicately try to pry apart your remote key fob with pry tools. Replace 1xCR2032 battery with flat head screwdriver.
Get new battery and install it in fob’s case. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check position on battery, by "+" mark.
Before assembling fob’s case, check that all is functioning by testing buttons on circuit board.
The last thing to do is put your cover back on fob. Delicately try to put the pieces in place by hands from top to bottom. If your remote key fob body tightly closed, we done. If not, repeat the last step.
Key Fob Battery Replacement 2018 Chevrolet Colorado Video
Chevy Silverado / Colorado Key Fob Battery Replacement - DIY
Still not working? Buy new one