How to Replace the Battery in a 2018 Chevrolet Corvette Key Fob
If your Chevrolet keyless entry remote is no longer unlock doors properly, the cell battery more likely must to be replaced. Yes, it is possible to replace the battery in your keyless entry remote with our guide. All tools, that you need is described in this post.
What size battery does 2018 Chevrolet Corvette key fob required
Before starting disassembly remote key fob make sure that you have all recommended tools and materials: flat head screwdriver and 1 CR2032 battery.- flat head screwdriver
- 1xCR2032 battery
Step by step guide
Inside of your remote key fob installed button battery. Open the key if it is in the remote key fob.
Delicately try to disassemble your keyless entry remote with pry tools. Change 1xCR2032 battery with flat head screwdriver.
Get new battery and install it in fob’s shell. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check polarity on battery, by "+" mark.
After the new battery installed, verify keyless entry remote functionality by pressing buttons. If all functions works, assemble your fob’s body in reverse order.
At this point squeeze keyless entry fob's back cover together. Line your case pieces together and put it in place by hands from top to bottom. If your key fob shell tightly closed, we done. If not, repeat the last step.
How to replace the battery video instruction
Corvette Key Fob Battery Replacement
Still not working? Buy new one