How to Open Your 2018 Ford EcoSport Key Fob and Change Battery
If your car remote key fob is not unlock doors correct, the battery most likely needs to be changed. In this case, we demonstrate how to disassembly Ford remote key fob and replace a dead battery DIY. If you gonna solve to do it at home near EcoSport, follow our instruction, but don't forget to check everything you need.
What type battery keyless entry remote require
Don't forget before open remote key fob check all that you need: flat head screwdriver and 1xCR2450 battery.- flat head screwdriver
- 1xCR2450 battery
Step by step guide
A tiny coin battery installed in the your key fob. Remove any internal key before you try to pry apart the keyless entry remote.
Accurately try to disassemble your remote key fob with pry tools. Change 1 CR2450 battery with flat head screwdriver.
Change old battery with fresh one CR2450. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check polarity on battery, by "+" mark.
When the new battery installed, verify key fob by pressing buttons. If everything is functioning, assemble your keyless entry fob's case in reverse order.
The last thing to do is put your cover back on fob. Gently try to put the pieces in place by hands from top to bottom. If your remote key fob body tightly closed, we done. If not, repeat the last step.
Key Fob Battery Replacement 2018 Ford EcoSport Video
Ford EcoSport Remote Key Fob Battery Replacement 2018 2019
Still not working? Buy new one