2018 Honda Clarity Key Fob Battery Replacement Guide
If your Clarity key fob is not open doors properly, the cell battery surely needs to be replaced. Below, you will benefit from knowing how to disassembly your remote key fob and replace a dead battery DIY. If you choose to do it at home near Clarity, use this instruction, but first make sure you have all you need.
What type battery keyless entry remote requirePrior to open remote key fob check all that you need: flat head screwdriver and CR1616 battery.
- 1xCR1616 battery
- flat head screwdriver
Step by step instruction
Inside of your keyless entry remote installed small button cell battery. Open key first, and then try to pry apart the remote key fob.
Delicately try to disassemble your remote key fob with hands or flat head screwdriver. Replace CR1616 battery with flat head screwdriver.
Change old battery with new one CR1616. Battery must be installed with the same position as was a previous. Your key fob will not work if you by mistake place battery wrong way.
When the new battery installed, check keyless entry remote by pressing buttons. If all functions works, assemble your fob’s shell in reverse order.
At this point squeeze fob’s back cover together. Line your body pieces together and assemble it together by hands from top to bottom. If your fob case firmly closed, we done. If not, repeat the last step.
Video of key fob disassembly
Honda Clarity / Hybrid Key Fob Battery Replacement - DIY