How to Open Your 2018 Lexus GS F Key Fob & Change Battery
If your Lexus key is no longer open doors perfectly, the cell battery most likely needs to be replaced. In this article, we are going to tell you how to disassembly your keyless entry remote and change a weak or dead battery DIY. If you gonna solve to do it at home near GS F, use this guide, but don't forget to check everything you need.
What type battery does 2018 Lexus GS F key fob take
Replacing battery in keyless entry remote require 1xCR2032 battery and flat head screwdriver. Prepare these materials and tools before opening and make sure to match the type of your keyless entry fob's batteries.- flat head screwdriver
- 1xCR2032 battery
Simple steps to change the battery in your car's key fob
A tiny coin battery installed inside the your remote key fob. Move the key out of the way if it is in the remote key fob.
Delicately try to disassemble your key fob with hands or flat head screwdriver. Remove CR2032 battery with flat head screwdriver.
Replace old battery with new one CR2032. Every battery has a negative and positive side and if you put the wrong connector down, the current cannot go into your circuit board and make it work. Check position on battery, by "+" mark.
After the new battery installed, verify key fob functionality by pressing buttons. If everything working properly, assemble your fob’s case in reverse order.
At this point squeeze fob’s back cover together. Line your shell pieces together and assemble it together by hands from top to bottom. If your keyless entry remote shell tightly closed, we done. If not, repeat the last step.
Key Fob Battery Replacement 2018 Lexus GS F Video
Lexus Smart Key Remote Fob Battery Change - How To Remove Replace GS 350, GS 450H, GS F Batteries
Still not working? Buy new one