How to Replace the Battery in a 2018 Mitsubishi Outlander Key Fob

Key fob allow access to your Outlander. When the remote key fob battery is discharged you’ll not to be able unlock trunk or doors remotely. In this article, we explained how to open your car keyless entry remote and change your Mitsubishi key battery step by step.
What size battery does 2018 Mitsubishi Outlander keyless entry remote take
Before you start to open key fob check all that you need: CR2032 battery and flat head screwdriver.- 1xCR2032 battery
- flat head screwdriver
Step by step instruction
A small button battery installed in the your keyless entry remote. Move the key out of the way if it is in the key fob.
Carefully try to pry apart your key fob with flat head screwdriver. Change 1xCR2032 battery with flat head screwdriver.
Now it's time to install new battery inside fob’s body. Battery must be installed with the same polarity as was a previous. Your keyless entry remote will not work if you mistakenly place battery wrong way.
Before assembling keyless entry fob's case, make sure that all working good by pressing buttons on circuit board.
At this point squeeze fob’s back cover together. Line your case pieces together and assemble it in place by hands from top to bottom. Inspect your remote key fob shell for gaps. If it is not tightly closed try to repeat last step.
Video of key fob opening
DIY - Key Fob Battery Mitsubishi Battery Change Outlander
Still not working? Buy new one