How to Open Your 2018 Nissan Pathfinder Key Fob and Change Battery
If your Nissan keyless entry remote isn't working correct, the cell battery most likely must to be changed. It's not difficult to replace the battery in your keyless entry remote with our instruction. All you need is outlined below.
What type battery does 2018 Nissan Pathfinder keyless entry remote required
Before going to disassembly keyless entry remote check all that you need: flat head screwdriver and 1 CR2032 battery.- 1xCR2032 battery
- flat head screwdriver
Step by step instruction
Inside of your key fob installed coin battery. Move the key out of the way if it is in the keyless entry remote.
Delicately try to disassemble your key fob with hands or flat head screwdriver. Remove 1xCR2032 battery with flat head screwdriver.
Get new battery and install it in fob’s case. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check position on battery, by "+" mark.
Before assembling fob’s case, verify that all functions works by testing buttons on circuit board.
The last thing to do is put your cover back on fob. Delicately try to assemble the two halves in place by hands from top to bottom. Inspect your key fob case for gaps. If it is not tightly closed try to repeat last step.
Video of keyless entry remote disassembly
2018 Nissan Pathfinder - Intelligent Key Remote Battery Replacement
Still not working? Buy new one