How to Open Your 2019 Acura TLX Key Fob and Change Battery
If your TLX key is not unlock doors properly, the battery likely needs to be replaced. It's not complicated to change the battery in your key fob with our guide. Everything you need is explained in this article.
What type battery does 2019 Acura TLX remote key fob takePrior to disassembly key fob check all that you need: flat head screwdriver and one CR2032 battery.
- flat head screwdriver
- 1xCR2032 battery
Simple steps to replace the battery in your car's key fob
Inside of your remote key fob installed small button battery. Open the key if it is in the remote key fob.
Accurately try to pry apart your key with pry tools. Replace CR2032 battery with flat head screwdriver.
Get new battery and install it in fob’s case. Every battery has a negative and positive side and if you put the wrong connector down, the current cannot go into your circuit board and make it work. Check position on battery, by "+" mark.
Before assembling fob’s case, verify that all is functioning by pressing buttons on circuit board.
At this point squeeze keyless entry fob's back cover together. Line your case two halves together and assemble it together by hands from top to bottom. If your remote key fob case tightly closed, we done. If not, repeat the last step.
Video of keyless entry remote disassembly
DIY Acura ILX RLX TLX Key Fob Battery Change - EASY!