2019 Ford Ranger Key Fob Battery Replacement Guide

Key fob allow access to your Ford. When the remote key fob battery is weak you lose your fob’s ability to use distance opening function. Yes, it is possible to replace the battery in your remote key fob with our instruction. Everything you need is described in this article.
What type battery does 2019 Ford Ranger keyless entry remote take
Replacing battery in key fob require one CR2450 battery and flat head screwdriver. Prepare these materials and tools before opening and make sure to match the size of your keyless entry fob's batteries.- 1xCR2450 battery
- flat head screwdriver
Simple steps to replace the battery in your Ranger's remote key fob
A tiny coin battery installed in the your remote key fob. Remove any internal key first, and then try to pry apart the remote key fob.
Carefully try to disassemble your key fob with flat head screwdriver. Replace CR2450 battery with flat head screwdriver.
Get new battery and install it inside fob’s case. Battery must be placed with the same position as was an old. Your key will not work if you mistakenly put battery wrong way.
Before assembling fob’s case, check that all working fine by testing buttons on circuit board.
At this point squeeze fob’s back cover together. Line your case pieces together and assemble it together by hands from top to bottom. Inspect your key fob body for gaps. If it is not firmly closed try to repeat last step.
Video of key opening
Ford Ranger Remote Key Fob Battery Replacement 2019
Still not working? Buy new one