How to Open Your 2019 Nissan Versa Note Key Fob & Change Battery

If your car key fob is not open doors correct, the battery likely must to be changed. Below, we described how to disassembly your car keyless entry remote and replace your Nissan key battery step by step.
What type battery does 2019 Nissan Versa Note keyless entry remote take
Don't forget before disassembly remote key fob be sure that you have all recommended tools and materials: 1 CR2025 battery and flat head screwdriver.- flat head screwdriver
- 1xCR2025 battery
Simple steps to replace the battery in your car's remote key fob
A small button cell battery installed in the your remote key fob. Remove any internal key first, and then try to pry apart the keyless entry remote.
Gently try to pry apart your key with pry tools. Change CR2025 battery with flat head screwdriver.
Replace old battery with fresh one CR2025. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check position on battery, by "+" mark.
When the new battery installed, verify keyless entry remote by pressing buttons. If everything working good, assemble your fob’s shell in reverse order.
At this point squeeze keyless entry fob's back cover together. Line your case two halves together and assemble it in place by hands from top to bottom. Inspect your fob body for gaps. If it is not tightly closed try to repeat last step.
How to change the battery video guide
How To Change Battery in Key Fob 2019 Nissan Versa
Still not working? Buy new one