How to Replace the Battery in a 2019 Subaru WRX Key Fob
Keyless entry remote grant easy access to your car. If the key fob battery is dead you will lose your fob’s ability to use remote opportunities. Yes, it is possible to replace the battery in your keyless entry remote with our guide. All tools, that you need is explained in this article.
What size battery does 2019 Subaru WRX remote key fob requiredChanging battery in key fob require flat head screwdriver and one CR2032 battery. Prepare these materials and tools before opening and make sure to match the size of your fob’s batteries.
- 1xCR2032 battery
- flat head screwdriver
Simple steps to change the battery in your WRX's keyless entry remote
Inside of your remote key fob installed tiny coin cell battery. Move the key out of the way if it is in the key fob.
Accurately try to pry apart your fob with flat head screwdriver. Change CR2032 battery with flat head screwdriver.
Replace old battery with new one CR2032. Battery must be installed with the same position as was a previous. Your remote key fob will not work if you mistakenly place battery wrong way.
Before assembling fob’s case, check that all functions works by pressing buttons on remote key fob.
The last thing to do is put your cover back on fob. Gently try to put the two halves in place by hands from top to bottom. If your remote key fob case firmly closed, we done. If not, repeat the last step.
How to replace the battery video guide
How To Replace Subaru Key Fob Battery DIY 2014 2015 2016 2017 2018 2019 2020
Still not working? Buy new one