How to Replace the Battery in a 2019 Toyota Land Cruiser Key Fob
Key fob grant easy access to your auto. Once the key fob battery is weak or dead you’ll not to be able close car from distance. It's not difficult to replace the battery in your remote key fob, and it’s easier than you think. All you need is described in this post.
What type battery key fob requireBefore you start to open remote key fob check all that you need: flat head screwdriver and 1 CR2032 battery.
- 1xCR2032 battery
- flat head screwdriver
Step by step instruction
A small coin battery installed in the your key fob. Move the key out of the way if it is in the remote key fob.
Gently try to pry apart your key with flat head screwdriver. Remove 1 CR2032 battery with flat head screwdriver.
Change old battery with new one CR2032. Battery must be placed with the same position as was an old. Your key will not work if you by mistake place battery wrong way.
Before assembling fob’s case, check that all is functioning by pressing buttons on key fob.
The last thing to do is put your cover back on fob. Delicately try to assemble the two halves in place by hands from top to bottom. Check your key shell for gaps. If it is not tightly closed try to repeat last step.
Video of key fob opening
Toyota Land Cruiser Key Fob Battery Replacement - DIY
Still not working? Buy new one