How to Replace the Battery in a 2020 Chrysler 300 Key Fob

Remote key fob allow access to your auto. If the remote key fob battery is dead you lose your keyless entry fob's ability to use remote functions. It's not difficult to replace the battery in your remote key fob, and it’s easier than you think. All tools, that you need is outlined below.
What is the battery key fob require
Don't forget before open keyless entry remote be sure that you have all required tools and materials: 1xCR2032 battery and flat head screwdriver.- flat head screwdriver
- 1xCR2032 battery
Simple steps to change the battery in your 300's remote key fob
A small coin battery installed in the your key fob. Remove any internal key first, and then try to pry apart the key fob.
Gently try to open your fob with hands or flat head screwdriver. Replace 1 CR2032 battery with flat head screwdriver.
Get new battery and install it in keyless entry fob's case. Be sure to connect the battery the right way around in a circuit. Your keyless entry remote will not work if you connect battery wrong way.
Before assembling keyless entry fob's case, verify that all working properly by testing buttons on circuit board.
The last thing to do is put your cover back on fob. Accurately try to assemble the pieces in place by hands from top to bottom. If your key case tightly closed, we done. If not, repeat the last step.
Video of key disassembly
DIY - Chrysler Key Fob battery replacement - 300 / 200