How to Open Your 2020 GMC Yukon Key Fob & Change Battery

How to Open Your 2020 GMC Yukon Key Fob & Change Battery

Key fob grant easy access to your car. If the remote key fob battery is dead or weak you not to be able lock doors from distance. Below, we explained how to open GMC keyless entry remote and change a discharged battery DIY. If you gonna solve to do it at home near Yukon, use this guide, but first make sure you have tools and materials required before you start.

What type battery key fob require

Don't forget before open keyless entry remote check all that you need: one CR2032 battery and flat head screwdriver.
  • flat head screwdriver
  • 1xCR2032 battery

Simple steps to change the battery in your car's key fob

A tiny button cell battery installed in the your key fob. Open key first, and then try to pry apart the key fob.

Accurately try to open your key with flat head screwdriver. Remove CR2032 battery with flat head screwdriver.

Change old battery with fresh one CR2032. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check position on battery, by "+" mark.

Before assembling fob’s case, verify that all functions works by pressing buttons on key fob.

The last thing to do is put your cover back on fob. Carefully try to put the two halves in place by hands from top to bottom. Inspect your key fob body for gaps. If it is not firmly closed try to repeat last step.

Key Fob Battery Replacement 2020 GMC Yukon Video

Tahoe / Suburban Key Fob Battery Replacement - DIY

Still not working? Buy new one

Frequently Asked Questions

Remote key fob of GMC Yukon require 1xCR2032 batteries. Most CR2032 batteries are under $4 depending on the type, brand and size packaging you buy. Take your old battery to the store, to find a proper replacement.

Often, after key fob battery change, you do not need to reprogram. Don't be scare of this procedure, because often it's described in user's manual.

Yes, you can change battery in your 2020 GMC Yukon keyless entry remote yourself. Most hard part is to disassembly keyless entry fob's case. It's pretty easy with our step by step guide.

Auto repair shop's pricing for replace the battery in key fob is $50-600 depending on the car.

You should replace batteries inside keyless entry remote of GMC Yukon at least every three or four years. The term of battery vary on frequency of use, operating conditions and quality. Lithium cells usually will last longer.

If your car signal strength reduced, fob's battery more than 4 years old, has low key battery indicator on dashboard or need multiple clicks to unlock or lock doors, in most cases battery replace in key fob needed. Current battery is dead with a high probability, but if it's not help, fob replace or repair required.
Be the first to comment.
Your message is required.

Fob Compatibility:

  1. FCC ID: HYQ1AA
  2. Models: 2014-2020 GMC Yukon