2020 Kia Sportage Key Fob Battery Replacement Guide
If your Kia remote key fob isn't unlock doors properly, the battery likely must to be replaced. In this article, you’ll benefit from knowing how to disassembly Kia key fob and change a weak or dead battery DIY. If you decide to do it at home near Sportage, follow our instruction, but first make sure you have everything you need before you start.
What type battery keyless entry remote useBefore going to open key fob be sure that you have all recommended tools and materials: flat head screwdriver and one CR2032 battery.
- 1xCR2032 battery
- flat head screwdriver
Step by step guide
A tiny button cell battery installed inside the your key fob. Remove any internal key first, and then try to pry apart the remote key fob.
Gently try to open your fob with hands or flat head screwdriver. Replace CR2032 battery with flat head screwdriver.
Get new battery and install it in keyless entry fob's body. Battery must be placed with the same polarity as was an old. Your key fob will not work if you by mistake put battery wrong way.
Before assembling keyless entry fob's case, verify that everything working good by pressing buttons on circuit board.
The last thing to do is put your cover back on fob. Delicately try to assemble the two halves together by hands from top to bottom. Check your keyless entry remote body for gaps. If it is not tightly closed try to repeat last step.
Video of key fob opening
KIA Sportage Key FOB Battery Replacement 2014-2019
Still not working? Buy new one