How to Open Your 2020 Nissan Pathfinder Key Fob & Change Battery
Keyless entry remote allow access to your car. Once the key battery is weak you will lose your fob’s ability to use distance opportunities. It's not difficult to change the battery in your key fob, and it’s easier than you think. Everything you need is described in this post.
What type battery does 2020 Nissan Pathfinder key fob requiredPrior to disassembly keyless entry remote check all that you need: flat head screwdriver and 1 CR2032 battery.
- 1xCR2032 battery
- flat head screwdriver
Step by step instruction
Inside of your remote key fob installed tiny button cell battery. Move the key out of the way if it is in the remote key fob.
Accurately try to pry apart your fob with flat head screwdriver. Remove one CR2032 battery with flat head screwdriver.
Get new battery and install it in keyless entry fob's body. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check position on battery, by "+" mark.
After the new battery installed, verify remote key fob by pressing buttons. If all functions works, assemble your fob’s shell in reverse order.
At this point squeeze fob’s back cover together. Line your case pieces together and assemble it in place by hands from top to bottom. Inspect your remote key fob case for gaps. If it is not firmly closed try to repeat last step.
How to change the battery video guide
Nissan Key Fob Battery Change - How To DIY Learning Tutorials
Still not working? Buy new one