Key Fob FCC ID Lookup and Match Checker
Enter the FCC ID from your original key fob and the one in a replacement listing. The checker tells you whether they match, flags the other details you must compare, and builds a search for the right fob.
Check a replacement key fob
FCC ID, buttons and part numberHow to match a key fob by FCC ID
- Find the FCC ID on your fob. Check the back of the case, inside the battery cover and under the emergency key.
- Type it in. Dashes and spaces do not matter.
- Add the listing’s FCC ID. Copy it from the product title, description or photos.
- Compare buttons and part number. One FCC ID can cover several button layouts.
- Order only on a full match. If anything differs, ask the seller to confirm fitment by VIN.
The FCC ID is a code of letters and numbers printed on every key fob sold in the United States. It identifies the radio transmitter inside. A replacement fob must carry the same FCC ID as your original to work with your car. It should also have the same button layout and, ideally, the same part number, because one FCC ID can cover several versions.
Two key fobs can look identical and still be incompatible. The shell is often shared across models and years, while the electronics change. The FCC ID is the quickest way to tell them apart, and the checker above compares the details that matter before you spend money.
What Is an FCC ID on a Key Fob?
Any device that transmits radio signals in the US needs approval from the Federal Communications Commission. Each approved design gets an FCC ID. The first three or five characters are the grantee code, which identifies the manufacturer. The rest is the product code chosen by that manufacturer.
For a key fob, the FCC ID tells you which transmitter design is inside. Fobs with different IDs use different hardware, and often a different frequency or signal format, so the car will not recognize them.
Where to Find the FCC ID
- On the back of the fob. Moulded into the plastic in small letters, usually starting with “FCC ID:”.
- Inside the case. Open the fob as if changing the battery and look at the inside of the back cover.
- Under the emergency key. On smart keys, slide out the metal blade and check the slot.
- On the circuit board label. On a few older remotes.
The lettering wears off with use. A phone camera with the flashlight held at a low angle makes it easier to read. There is a photo guide in how to find the FCC ID on a key fob.
Why an FCC ID Match Is Not Always Enough
Carmakers reuse one approved transmitter design across many fobs. Under a single FCC ID you may find a three-button version, a four-button version with remote start and a five-button version with a power liftgate. They pair with different cars or trims. So check three more things:
- Button count and icons. They should match your original exactly.
- Part number. Usually printed near the FCC ID or inside the case. See how to find a key fob part number.
- Year and trim fitment. Read the listing’s compatibility notes and ask the seller if anything is unclear.
FCC ID vs IC Number vs Part Number
| Code | What it is | Use it to |
|---|---|---|
| FCC ID | US radio approval for the transmitter design | Rule out fobs with the wrong electronics |
| IC number | The Canadian equivalent, printed next to the FCC ID | Cross-check, if the listing shows it |
| Part number | The carmaker’s own number for that exact fob | Confirm the exact version |
What If You Have No Original Fob?
If every key is lost, you cannot read the FCC ID from the old one. A dealer parts counter can look up the correct fob part number from your VIN, and a good automotive locksmith can do the same. With that part number, you can shop around. Our guide to the best aftermarket key fob replacements explains what to look for.
After You Find a Match
A matching fob still has to be programmed to the car. Check whether you can do that yourself with the key fob programming cost calculator, and avoid used smart keys unless the seller states that they have been unlocked for reprogramming.
Frequently Asked Questions
It is the approval code for the radio transmitter inside the fob, issued by the US Federal Communications Commission. Fobs with the same FCC ID share the same transmitter design.
Yes. A fob with a different FCC ID uses different electronics and will almost always fail to program to your car.
Yes. One FCC ID can cover several button layouts and part numbers for different models or trims. Match the buttons and the part number as well.
Usually moulded into the back of the case. If not, look inside the battery cover or in the slot under the emergency key blade.
Yes. Searching the FCC ID on the FCC database or a site such as fccid.io shows the manufacturer and operating frequency. Searching it on a shopping site finds replacement fobs sold under that ID.
