How to Jump Start a Hybrid Car
To jump start a hybrid car, open the hood and find the 12V jump terminal or battery. Connect red to the hybrid’s positive jump terminal, red to the donor’s positive, black to the donor’s negative, and black to bare metal on the hybrid. Press the brake and power button until the READY light comes on. Remove the cables in reverse order.
When a hybrid will not start, the large high-voltage battery is rarely the problem. The usual culprit is the small 12-volt battery that boots the car’s computers and closes the relays that connect the hybrid system. If it is flat, the dash may flicker, the doors may not unlock, and the car will not reach READY.
Jump starting a hybrid is easier on the donor than jumping a regular car, because the 12-volt battery only needs enough power to wake the system, not to crank an engine. The main difference is where you connect. Many hybrids keep the 12-volt battery in the trunk or under a seat and provide a jump terminal under the hood. For a standard car jump, see how to jump start a car.

Can You Jump Start a Hybrid Car?
Yes. Almost every hybrid can be jump started through its 12-volt system using jumper cables and another car, or a portable jump starter. What you should not do is connect anything to the high-voltage system. The orange cables and the large battery pack are never part of a jump.
Where to Connect on Common Hybrids
| Vehicle | 12V battery location | Where to connect for a jump |
|---|---|---|
| Toyota Prius (most generations) | Rear cargo area on many years, under the hood on some newer ones | Positive jump terminal in the under-hood fuse box; ground on bare metal |
| Toyota RAV4 Hybrid, 2019 and newer | Rear cargo area, right side | Jump terminals under the hood, per the manual |
| Toyota Camry Hybrid | Varies by generation | Under-hood jump terminal or battery, per the manual |
| Lexus hybrids | Trunk, under-hood or rear seat by model | Under-hood jump terminal on many models |
| Honda hybrids | Usually under the hood | Battery posts like a regular car |
| Ford and Lincoln hybrids | Usually under the hood | Battery posts or remote posts |
| Hyundai and Kia hybrids | Often under the hood or in the trunk | Some have a 12V battery reset button instead; check the manual |
Some Hyundai and Kia hybrids use a lithium-ion 12-volt battery integrated with the hybrid system and include a “12V battery reset” button on the dash. Pressing it and then starting within a short window may let the car start without cables. Check your manual for the exact steps.
What You Need
- Jumper cables, or a portable jump starter. A small pack is usually enough for a hybrid.
- A donor car with a healthy 12-volt battery, if using cables
- Safety glasses and gloves
- Your owner’s manual to find the jump terminal
Compact Portable Jump Starter
A compact lithium jump starter with spark-proof clamps and reverse-polarity protection is ideal for hybrids, which need little power to wake up.
As an Amazon Associate, ReplaceKeyFob earns from qualifying purchases.
How to Jump Start a Hybrid Car With Cables
- Park the donor car close but not touching the hybrid. Turn off both vehicles.
- Turn off accessories in the hybrid: lights, climate, audio.
- Open the hybrid’s hood and find the jump terminal. On many Toyota hybrids it is under a cover in the fuse box, marked with a plus sign.
- Connect red to the hybrid’s positive jump terminal or the positive battery post.
- Connect the other red clamp to the donor’s positive post.
- Connect black to the donor’s negative post.
- Connect the last black clamp to bare, unpainted metal on the hybrid, such as a bolt or bracket near the jump terminal, or the ground point the manual shows.
- Start the donor car and let it run for a few minutes.
- Press the brake and the power button on the hybrid. Wait for the READY light.
- Remove cables in reverse order: black from hybrid, black from donor, red from donor, red from hybrid.
- Keep the hybrid in READY mode for at least 20 to 30 minutes, or drive it, so the DC-DC converter can recharge the 12-volt battery.
Why the last clamp goes on bare metal
The final connection can spark. Making it away from the battery keeps any spark away from the hydrogen gas a battery can release. On hybrids with the battery in the cabin or trunk, the under-hood ground point is the designed location.

How to Jump Start a Hybrid With a Portable Jump Starter
- Make sure the pack is charged.
- With the pack off, connect red to the hybrid’s positive jump terminal and black to the ground point.
- Turn the pack on.
- Press the brake and power button. Wait for READY.
- Turn the pack off and remove black, then red.
Hybrids draw little current to wake up, so even a small pack usually works. See the best jump starters for hybrid cars for suitable options.
Specific Model Notes
Toyota Prius
On many Prius generations, the 12-volt battery is in the rear cargo area, and a positive jump terminal sits inside the under-hood fuse box. Lift the fuse box cover, find the terminal marked with a plus sign, and connect there. Some newer models place the battery under the hood; follow the manual.
Toyota Camry Hybrid
Camry Hybrid layouts changed between generations. Look under the hood for a jump terminal or the battery itself. If the battery is in the trunk, use the under-hood jump point shown in the manual.
Honda, Ford and others
Many Honda and Ford hybrids have the 12-volt battery under the hood. Jump them like a regular car.
Can a Hybrid Jump Start Another Car?
Many hybrid manuals advise against using a hybrid to jump another vehicle. The donor car’s starter can draw more current than the hybrid’s DC-DC converter and fuses are designed to supply. If you need to help another driver, use a portable jump starter instead. Check your own manual for the official position.
If the Hybrid Still Will Not Reach READY
| Symptom | Likely cause | What to do |
|---|---|---|
| Dash lights come on, no READY | Low voltage or bad connection | Recheck clamps; let donor run longer |
| Nothing at all | Wrong terminal or blown fuse | Confirm jump terminal; check main fuse |
| READY, then shuts down | 12V battery cannot hold charge | Replace the 12V battery |
| Hybrid system warning | Fault unrelated to 12V | Scan codes with a hybrid-capable tool |
| Key not detected | Dead key fob battery | See Toyota Prius key not detected |
If the car needs regular jumps, the 12-volt battery is likely worn out. See how to replace the 12V battery in a hybrid.
Why Hybrids Go Flat More Easily
A hybrid’s 12-volt battery is usually smaller than a regular car battery, because it never cranks the engine. It is charged by the DC-DC converter only when the car is in READY mode. If the car sits for two or three weeks, especially with a dashcam, a phone key system or an aftermarket accessory drawing power, the 12-volt battery can run flat while the big battery still shows plenty of charge.
To avoid repeat jumps:
- Drive or keep it in READY for at least 30 minutes every week or two.
- Use a maintainer on the jump terminal and ground point if the car sits; see how to keep a car battery charged.
- Unplug accessories that stay powered with the car off.
- Test the 12V battery every year after the third year; see how to use a car battery tester.
Safety Notes
- Never touch orange high-voltage cables or the hybrid battery pack.
- Wear eye protection. Batteries can vent and spit acid.
- Do not jump a frozen, cracked or swollen battery.
- Keep clamps from touching each other while connected to a battery.
- Do not rev the donor engine excessively; a gentle idle is enough for a hybrid.
Cost if You Call for Help
Roadside assistance jump starts are often included with insurance or memberships. Otherwise, a service call typically costs about $50 to $150. A new hybrid 12-volt battery typically costs about $150 to $300 for the part, and about $250 to $450 installed at a dealer.
Frequently Asked Questions
Yes. Jump the 12-volt system using the under-hood jump terminal or the 12-volt battery. Never connect to the high-voltage system.
On many Prius models, to the positive jump terminal inside the under-hood fuse box and a bare metal ground point. Check the manual for your year.
Keep it in READY mode or drive it for at least 20 to 30 minutes so the 12-volt battery can recharge.
Many manufacturers advise against it because it can overload the hybrid’s 12-volt system. Use a portable jump starter instead.
A compact lithium jump starter with spark-proof clamps is usually enough, since hybrids need little power to wake up.
