How to Open a Car Trunk From the Inside
To open a car trunk from the inside, find the glow-in-the-dark release handle near the latch and pull it. US cars with trunks built since the 2002 model year have one. On older cars, fold the rear seats or remove the lid trim and push the latch lever. From the cabin, use the button, lever or fob.
Most people search this for one of two reasons. Either the trunk will not open from outside and they want to get to it through the car, or they want to know how a person could get out if trapped inside. This guide covers both, starting with the safety release because it can save a life.
In the United States, Federal Motor Vehicle Safety Standard 401 requires an internal trunk release on passenger cars with trunks manufactured from September 2001 onward. It is a handle or button that glows in the dark after being exposed to light, placed near the latch so someone inside the trunk can find it.

Method 1: The Glow-in-the-Dark Release Handle
- Look near the trunk latch, usually at the center of the trunk lid’s inner edge.
- Find a T-shaped handle, a pull tab, or a button, often with an icon of a person leaving a car.
- Pull it firmly toward you or push the button.
- Push the trunk lid up.
The handle glows faintly because it absorbs light while the trunk is open and gives it off in the dark. If you cannot see it, feel along the latch area. The release works even if the car is locked and the battery is dead, because it moves the latch mechanically on most cars.
Teach children
Show children where the handle is and let them practice once with the trunk open and an adult present. Kids playing hide and seek are the most common trunk entrapment cases. Keep the car locked and keys out of reach at home.
Method 2: Through the Rear Seats
If the trunk will not open from outside or you have an older car without a release handle:
- Open a rear door.
- Find the rear seat release. It may be a pull tab or lever at the top of the seatback, a strap at the seat base, or a lever inside the trunk.
- Fold the seatback forward.
- Reach or crawl into the trunk area.
- Use the internal release handle, or work on the latch from inside (Method 3).
Some sedans have a pass-through or ski port behind the center armrest, which gives a smaller opening. Some older cars have fixed rear seats, so this method will not work.
Plastic trim removal tool set
Nylon trim tools remove trunk lid trim panels and push pins without breaking them, so you can reach the latch on older cars without a release handle.
As an Amazon Associate, ReplaceKeyFob earns from qualifying purchases.
Method 3: Release the Latch by Hand
When there is no handle, or it is broken:
- Find the trunk lid trim panel, the cover on the inside of the lid, near the latch.
- Pop the push-pin clips with a trim tool or flat screwdriver, or pull the panel corner gently.
- Look at the latch. You will see a lever where the release cable or rod connects.
- Push or pull the lever in the direction the cable pulls it, using a screwdriver or your fingers.
- Push the lid up.
On many cars, a short cable from the remote release runs to the latch. Pulling that cable by hand opens the trunk.

How to Open the Trunk From the Cabin
| Release type | Where to look | Notes |
|---|---|---|
| Button on dash or door | Left of the steering wheel or on the driver door | May need the car unlocked or in Park |
| Floor lever | Beside the driver seat, often with a fuel door lever | Common on older Honda, Toyota and Nissan models |
| Key fob button | Usually hold for about a second | Hold, not tap, on many cars |
| Trunk lid button | Under the trunk lid handle area | Smart key cars need the key nearby |
| Touchscreen or app | Vehicle controls menu | On many EVs and newer cars |
| Hands-free kick sensor | Under the rear bumper | Power trunks and liftgates on many SUVs |
Trunk lockout switches
Many cars have a valet or trunk lockout feature that disables the cabin trunk release. On some models it is a switch inside the glovebox; on others, turning the key in the trunk lock sets it, or folding seat locks can be locked with the key. If the cabin button does nothing, check the glovebox for a switch and your owner’s manual for valet mode.
Smart key and power trunks
On smart key cars, the button on the trunk lid only works if the fob is within a few feet. Power trunks and liftgates can be opened by holding the fob button, pressing the cabin switch, or using the kick sensor. If the power function fails, turning it off and opening by hand often works. For fob problems, see key fob trunk button not working and key fob opens trunk but not doors.
Trunk Release by Car Era
- Before 2002 model year: many sedans have no internal release. Some owners fit an aftermarket glow release kit, which is a simple and worthwhile upgrade for families.
- 2002 and newer sedans: internal glow handle or button required in the US. Cabin release by button, floor lever or fob.
- Many 2010s and newer cars: electric trunk latches with a button on the lid, often working only with the smart key nearby.
- Newer EVs and luxury cars: power trunks with touchscreen, app and kick sensor control. The internal release is still there, but the cabin release may only be on the screen.
Knowing which era your car belongs to tells you where to look first, especially when you are helping someone else in an unfamiliar car.
SUVs, Hatchbacks and Wagons
Liftgates are not covered by the same trunk release rule, but most have an emergency release. Look for a small slot, cover or hole in the liftgate’s inner trim panel, near the latch at the bottom center. Pop the cover and push the lever inside with a screwdriver or the fob’s key blade. Fold the second and third row seats to reach it from inside.
If the Battery Is Dead
Electric releases do nothing with a dead battery. Options:
- Use the mechanical key in the trunk lock, if your car has a keyhole. On many cars it is hidden behind a trim cover or in the license plate area.
- Fold the rear seats from inside the car and use the internal handle.
- Some cars let you power the electrical system through a jump terminal under the hood; see how to jump start a car for safe connection order.
If you also cannot get into the car because the fob is dead, read can a dead key fob battery lock you out.
Troubleshooting
| Problem | Likely cause | Fix |
|---|---|---|
| Glow handle pulls, trunk does not open | Cable disconnected or latch jammed | Remove trim, release latch by hand |
| Cabin button does nothing | Valet lockout, fuse, or not in Park | Check glovebox switch, fuse and gear |
| Fob button does nothing | Fob battery or hold time | Hold longer, replace fob battery |
| Trunk pops but will not lift | Weak struts or seal stuck | Lift by hand; replace struts |
| Power liftgate stops halfway | Obstruction sensor or low voltage | Close by hand, check battery |
| Trunk opens but will not latch | Latch stuck closed | Reset latch with a screwdriver |
If the latch is jammed rather than the release, the same principles as a door latch apply; see how to open a car door with a broken latch.
Mistakes to Avoid
- Prying the trunk lid from outside. You will bend the lid and damage paint.
- Cutting the release cable to “fix” a stuck trunk.
- Removing the internal release handle. It is a safety device.
- Slamming a power trunk shut. It strains the motor and gears.
- Leaving keys where children can open the trunk.
Repair Costs in 2026
Typical US shop costs: trunk release cable about $100 to $250, trunk latch with actuator about $150 to $400, trunk release switch about $80 to $200, and power liftgate strut or motor about $250 to $700 per side. A locksmith or dealer can also open a jammed trunk for about $75 to $200.
Frequently Asked Questions
In the US, passenger cars with trunks made since the 2002 model year must have an internal release. Older cars may not, and SUVs and hatchbacks use different emergency releases.
Near the trunk latch on the inside of the lid, as a T-handle, pull tab or button that glows in the dark.
Try the key fob, the key in the trunk lock and the glovebox valet switch. If none work, fold the rear seats and use the internal release.
Yes, using the mechanical key if there is a keyhole, or by folding the rear seats and pulling the internal release handle, which is usually mechanical.
Turn off the power trunk function if your car allows it, then use the fob or button to release the latch and lift the lid by hand. If the latch will not release, use the internal emergency handle.
